Thread: New start
-
23-08-2017 #71
Looks nice and beefy!!!
-
23-08-2017 #72
-
27-08-2017 #73
Small update!
Pimped my y axis a bit ;)
And a question.
My motors have filed down shafts for good connection with pulley setscrews.
Should I file a groove in the ballscrew or is it to hard to mark? :)
Don't want it slipping in action later...
This week I'm hoping to motorize my first axis.. have motors, drivers, pulleys and a license to uccnc. Waiting to get an uc300 in the mail :D Chinese BOB will have to do for testing (because I have it)
Still missing pulley belts but that might solve itself aswell hehe
-
27-08-2017 #74
Generally the bits that have been machined (ie the ends) aren’t that hard as the case hardening is gone. I’ve never had any issue grinding a flat for a screw
-
Looking good have you drilled the plate for the spindle?
..Clive
The more you know, The better you know, How little you know
-
28-08-2017 #76
Yeah there are some holes prepared with m8 thread at the lower part of the plate.
Have to order the standard spindle clamp from ebay or maybe have one made ;)
The holes I made for the ballnut bracket are a little low on the plate.. don't really know what I was thinking when I drew that up :D
Skickat från min SM-N910C via Tapatalk
-
28-08-2017 #77
-
13-09-2017 #78
Small update!
I think there is smooth action going on..
https://youtu.be/KQl2zc84KsM
How do I embed youtube links? :DLast edited by Nr1madman; 13-09-2017 at 02:18 PM.
-
13-09-2017 #79
One more thing.. I repacked my stiff linear bearing. I was right! There was one ball in the wrong track!!
Now it's smooth so when I get time I'm gonna mount my y axis aswell :D
-
The Following User Says Thank You to Nr1madman For This Useful Post:
-
13-09-2017 #80
Last edited by Desertboy; 13-09-2017 at 02:25 PM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
The Following User Says Thank You to Desertboy For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
NEW MEMBER: We all need to start somewhere!
By Realtime in forum New Member IntroductionsReplies: 0Last Post: 16-05-2017, 08:43 PM -
NEW MEMBER: A new start for me.......
By Nthkentman in forum New Member IntroductionsReplies: 4Last Post: 23-08-2014, 10:50 AM -
Where to start?
By Inquisitor in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 27-11-2012, 02:35 PM -
where to start
By martin54 in forum Gantry/Router Machines & BuildingReplies: 16Last Post: 22-09-2012, 11:29 AM -
is this 2.5d where do i start? help please if you can
By h4ppy-chris in forum General DiscussionReplies: 4Last Post: 29-03-2011, 12:21 PM
Bookmarks