. .

Thread: New start

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 27-08-2017 #1
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 8 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Looking good have you drilled the plate for the spindle?
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
  2. 28-08-2017 #2
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    Quote Originally Posted by Clive S View Post
    Looking good have you drilled the plate for the spindle?
    Yeah there are some holes prepared with m8 thread at the lower part of the plate.
    Have to order the standard spindle clamp from ebay or maybe have one made ;)

    The holes I made for the ballnut bracket are a little low on the plate.. don't really know what I was thinking when I drew that up :D

    Skickat från min SM-N910C via Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules