Thread: New start
Threaded View
-
28-08-2017 #10
Last Activity: 20-04-2020
Yeah there are some holes prepared with m8 thread at the lower part of the plate.
Originally Posted by Clive S
Have to order the standard spindle clamp from ebay or maybe have one made ;)
The holes I made for the ballnut bracket are a little low on the plate.. don't really know what I was thinking when I drew that up :D
Skickat från min SM-N910C via Tapatalk
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: We all need to start somewhere!
By Realtime in forum New Member IntroductionsReplies: 0Last Post: 16-05-2017, 08:43 PM -
NEW MEMBER: A new start for me.......
By Nthkentman in forum New Member IntroductionsReplies: 4Last Post: 23-08-2014, 10:50 AM -
Where to start?
By Inquisitor in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 27-11-2012, 02:35 PM -
where to start
By martin54 in forum Gantry/Router Machines & BuildingReplies: 16Last Post: 22-09-2012, 11:29 AM -
is this 2.5d where do i start? help please if you can
By h4ppy-chris in forum General DiscussionReplies: 4Last Post: 29-03-2011, 12:21 PM
Bookmarks