. .

Thread: New start

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 23-01-2018 #1
    Nickhofen's Avatar
    Lives in Piraeus, Greece.
    Nickhofen
    Last Activity: 08-09-2024 Has been a member for 7-8 years. Has a total post count of 402. Received thanks 68 times, giving thanks to others 184 times.
    I know that Robert but I always seek for the latest version,lol!
    Reply With Quote Reply With Quote
  2. 23-01-2018 #2
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    Quote Originally Posted by Nickhofen View Post
    I know that Robert but I always seek for the latest version,lol!
    Hahaha :D
    You know to look for the latest stable version... right?

    Skickat från min SM-G955F via Tapatalk
    Reply With Quote Reply With Quote
  3. 23-01-2018 #3
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 14-06-2025 Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    What drivers have you got?
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
  4. 23-01-2018 #4
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    Quote Originally Posted by Desertboy View Post
    What drivers have you got?
    Im a cheap bastard (probably on the stupid side)
    Got myself som 2dm860 chinastyle drivers..
    They accept 80vac or 110vdc

    Will se how they work ;)

    Skickat från min SM-G955F via Tapatalk
    Reply With Quote Reply With Quote
  5. 23-01-2018 #5
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 14-06-2025 Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Quote Originally Posted by Nr1madman View Post
    Im a cheap bastard (probably on the stupid side)
    Got myself som 2dm860 chinastyle drivers..
    They accept 80vac or 110vdc

    Will se how they work ;)

    Skickat från min SM-G955F via Tapatalk
    Whatever works for you I was going to use an arduino and polou drivers originally glad I didn't lol. But they were cheap so I might well use them for laser cutter.

    Given the price of a PP BOB the arduino really doesn't make sense and it's actually more expensive assuming you can get a PC for free for this task which I'm sure most of us can.
    Last edited by Desertboy; 23-01-2018 at 08:25 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
  6. 31-01-2018 #6
    Zinci's Avatar
    Lives in London, United Kingdom.
    Zinci
    Last Activity: 07-03-2018 Has been a member for 7-8 years. Has a total post count of 3.
    Just re-read the whole thread and I may have missed it again, but did not see how do you connect the two extrusions to each other? What is their size BTW?
    Reply With Quote Reply With Quote
  7. 31-01-2018 #7
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    Quote Originally Posted by Zinci View Post
    Just re-read the whole thread and I may have missed it again, but did not see how do you connect the two extrusions to each other? What is their size BTW?
    I used 40x80 extrusion, most recommend 45x90 but this size was more availible for me.
    If doing it again I would order 45x90 :)

    Connected the profiles with t nuts in one extrusion. Then drilled through the other to be able to screw it together. Thought this would make a nice 90degree angle all by itself but I was misstaken! Have since loosened the bolts and retightened them while checking with a engineers square.. now I have a much better alignment!
    Ofcourse the endplates help. Had them milled by a happy forummember with accurate hole placement for easy alignment.

    Hope to get some free time soon to continue with the build ;) Christmas period has been hectic!!

    Skickat från min SM-G955F via Tapatalk
    Reply With Quote Reply With Quote

  8. The Following User Says Thank You to Nr1madman For This Useful Post:

  9. 23-01-2018 #8
    Nickhofen's Avatar
    Lives in Piraeus, Greece.
    Nickhofen
    Last Activity: 08-09-2024 Has been a member for 7-8 years. Has a total post count of 402. Received thanks 68 times, giving thanks to others 184 times.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules