Also worth mentioning, do you really NEED a 32bit controller? I only use 32bit because my printers are driven by ballscrews and the steps per mm is higher than using belts, so performance wasnt great for me until i went 32bit. If you want to use ballscrews or build fast Delta Printer i would stick to Ramps or similar, Mega cheap and very easy to setup.
Im coming to that conclusion and may just get a cheap mega/ramps set up to start with while I learn. the belt drives I'm using are from a vinyl plotter and are geared so lookes like I will have plenty of resolution (20mm/200=0.1mm with no microstepping)

I do want to be able to print small high detailed parts tho.

Other than the fact that i can use a 1/32 mircostepping on the swappable boards is there any advantage of going with the soldered drives limited to 1/16th?