Scortch @ Scortchworks

[Leadhead]

Dead was an over reaction.It seemed to me that when I tried to make contact the various methods offered for doing so,did not work. - Eventually I did contact him through F/Book. He told me he was unaware of any problems. This in the light of my Norton 360 reporting it as unsafe and actually removing the G Code Ripper programme. I never witnessed such abrupt action from Norton and I was, not unnaturally rattled. The guy made no further comment and thus it would have been foolish to continue. Unfortunate as he has some very useful programmes.
Eddycurrent if you should decide to download perhaps you will report what you find.

[m_c]

Lots of anti-virus programs will do that to anything they don't recognise.

I've normally got to disable AVG whenever I install a Dynomotion update, as it blocks installation due to the main executable not having been scanned by them, so they flag it as unsafe and block/delete it's installation. AVG do however give the option of uploading the file for further analysis, and it'll come back a couple hours later saying it's clear, so anybody trying to install after should not get any problems.

[Leadhead]

Thanks for info m_c. I never had this happen before so will look for a workaround.
Scorch came back to me with the quip "well you wont get a virus then"

[Ger21]

Thanks for info m_c. I never had this happen before so will look for a workaround.

Get rid of Norton!!

Lots of people using G Code Ripper and F Engrave.

[magicniner]

Scorch came back to me with the quip "well you wont get a virus then"

He seems quite restrained and amusing given the number who probably tell him the same each week ;-)

[Leadhead]

Duplicate post!