. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2017 #2
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 21 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by Desertboy View Post
    My router is being built with arduino electronics with 24v at moment but I would like to upgrade them to get the full potential out of my router.

    I'm a little confused on the electronics that I need I was thinking of buying 3 of these
    http://www.ebay.co.uk/itm/Used-AM882...AAAOSwe-FVAS~f

    And a dirt cheap breakout board
    http://www.ebay.co.uk/itm/5-Axis-CNC...EAAOSw7s5Xhe2P

    Would this be enough to connect to linuxcnc/mach 3

    I would run 1 driver with 2 motors (Y) and 1 driver with 1 motor (X, my gantry) at 48v with a 12amp+ power supply (My nemas are under 3amps) then the Z axis with the final driver at 24v for now.

    Or the other choice buy 3 AM882's one for each motor and then run the Z axis with a TB6600.
    OK First a good choice on the drives but it is a bad idea to connect 2 motors to one drive. Forget the TB6600 and run all the drives from 68V power supply. The bob will limit your speed but will work.

    You can buy NEW here £53 https://www.aliexpress.com/item/Lead...1-0ba0dbf2bbff
    Last edited by Clive S; 02-08-2017 at 12:40 PM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Clive S For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. which breakout board?
    By johngoodrich in forum General Electronics
    Replies: 4
    Last Post: 12-03-2017, 01:54 AM
  2. FOR SALE: 3 Axis CNC USB Motion Card Mach3 200KHz Breakout Board For Stepper/Servo Driver
    By dudz in forum Items For Sale
    Replies: 0
    Last Post: 03-01-2015, 03:40 PM
  3. eBay: uirobot stepper drivers and uniport 2 board
    By andrewuk in forum Items On eBay UK
    Replies: 0
    Last Post: 11-09-2013, 09:47 AM
  4. 2x Motors, 2x drivers. How about breakout?
    By Tenson in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 20-09-2012, 03:21 PM
  5. Stepper Driver / PSU / Breakout board Wiring ?
    By manofgresley in forum General Electronics
    Replies: 2
    Last Post: 16-08-2012, 05:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules