Hi, Everybody. I am a new member and have been hacking away at an Isel 2018. I have replaced the electronics with new chinese bits and pieces, but am trying to reuse the unregulated power supply. I have added voltage regulators to the lower voltage outputs leading to the new electronics, but am intending to keep and use the power to the motors. My question regarding that power is: Gabs'e s 2015 diagram indicates that the motor power is around 21.5v. My unit seems to be outputting 34.7v. My unit is set for north america, and my local voltage is 124, which is high due to how close I am to the transformer on the pole. I am curious if anybody else has checked the voltage being fed to the motors. 21.5 seems low, but I don't like that magic purple smoke thing. Thank you in advance.