Hybrid View
-
14-08-2017 #1
fair point will keep door as there is a vacuum point and it may help in small shed, common sense not needed these days this is why there is ELF and Staffy
-
25-08-2017 #2
I had a quiet day went and wired electronics, I have used a KK01 BoB, CWD556 drivers, a UC100 motion control ( but bloody thing keeps dropping out no blue light) I have used 3 of the windings on origional transformer I built a couple of rectifiers to drive the E-Stop and limits through a couple of relays
Just waiting for some 9 pin breakout boards to connect to origional motors But all powers
-
28-08-2017 #3
all running now I need to decide what way to go with software untill today i thought my Mah3 was a full version but after a update its showing demo, so Mach4 (but after playing all day with demo cant get head around it) Mach3 licence
or the outsider UCCNC I did think of fusion 360 but pc is only 32bit Please someone give me some pointers
Steve
-
04-09-2017 #4You think that's too expensive? You're not a Model Engineer are you? :D
-
04-09-2017 #5
Copy your license file back into the Mach3 folder, as Mach3 licenses are not legally transferable if you didn't buy a license you don't have one -
http://www.machsupport.com/license-delivery/
- NickYou think that's too expensive? You're not a Model Engineer are you? :D
-
13-09-2017 #6
-
03-11-2017 #7
Hi guys,
I have bought the same beast and I am considering upgrading it, because the original Isel board requires using Isel code and is absolutely not efficient for 3D machining.
I plan using UCCNC and a UC300 motion controller, as cnc.miller.
I didn't found the stepper motors documentation and I'd like to avoid disassembling the machine to get their model.
Does someone have this information?
Steve, how did you choose you drivers?
Thanks in advance
-
06-11-2017 #8
Hi cnc.miller,
See if Gerry's explanations in this thread are of any help:
https://en.industryarena.com/forum/u...s--324554.html
HTH
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
SOLD: Various small CNC machines - ISEL/Unimatic
By badgerman in forum Items For SaleReplies: 14Last Post: 22-01-2020, 09:58 PM -
Is this price fair? Isel CPM 2018 / Unimatic Educam 20
By vimes1984 in forum General DiscussionReplies: 11Last Post: 12-01-2020, 01:27 PM -
Unimatic eduCam 20 Pro Driver Software
By Widowmaker in forum Machine DiscussionReplies: 0Last Post: 24-12-2019, 01:18 PM -
FOR SALE: Unimatic EduCam 20 for sale
By Mal Weightman in forum Items For SaleReplies: 0Last Post: 20-10-2018, 05:16 PM -
ISEL GFM 4433/ educam 44
By macomk in forum Machine DiscussionReplies: 0Last Post: 18-06-2013, 10:01 PM
Bookmarks