Ok so i solved the FOR DCM problem.
A wiring issue. 8)

Now i need to find out how to control the 5 axis bob 0-10v output.

m3 s1000 turns on relais
m5 off.

S1000 should set a voltage to output pin 1.. in pwm..

Im not sure what pwm speed / frequency works with the bob

1 khz?

Also it looks like it is proportional but reversed.

Anyone got a 5 axis 0-10volt working on uccnc?

Or should i skip hardware I/O and go straight for modbus?


Grtz Bert.



Verstuurd vanaf mijn SM-A320FL met Tapatalk