. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 26-03-2018 #11
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,342. Received thanks 618 times, giving thanks to others 82 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    OK
    1No. https://www.rapidonline.com/vigortro...-x-25v-88-0033
    some people use 24-24v secondary depends how high you mains voltage is. I don't know what your supply is? for the primary

    3 No. https://www.rapidonline.com/jianghai...-4khrs-59-6175

    3 No. https://www.rapidonline.com/lcr-ep08...-clamp-11-3004

    1 No. https://www.rapidonline.com/dc-compo...a-600v-47-1012

    With you having about 225V mains and over a 25 MTr run you could go with 25 - 25 secondary
    625 Va will be more than fine I use 500 Va with 4 3.1Nm 23's with no problems
    20000uf is over kill.

    cy 4 core either .75 or 1mm for the spindle
    Last edited by Clive S; 26-03-2018 at 06:03 PM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. BUILD LOG: First time build - Steel Frame CNC Router
    By examorph in forum DIY Router Build Logs
    Replies: 144
    Last Post: 19-10-2023, 06:25 PM
  2. BUILD LOG: First Build 5 x 12 Steel Frame CNC router
    By Scott Damman in forum DIY Router Build Logs
    Replies: 104
    Last Post: 18-01-2017, 06:36 PM
  3. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM
  4. 600x900 Steel welded router build
    By embraced in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 08-10-2014, 10:55 PM
  5. BUILD LOG: First steel diy CNC router build
    By ivars211 in forum DIY Router Build Logs
    Replies: 59
    Last Post: 28-07-2014, 08:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules