Quote Originally Posted by Clive S View Post
Ok I am not a math person but I think you might be doing this the wrong way.

25-25 = 50 x 1.414 = 70.07 - rectifier 2 x 1.1 v = 68.5v

Single or double primary no difference, dual primary are easier to find. You won't have any trouble with 25-25 or 24-24 v sec.

Don't forget you are measuring V without load. You also said you have a 25Mtr run

Sorry about the links the forum shortened them.
Hi Clive S ...

I was just compensating for the raised mains voltage 235 vs 230...

So what about the drives.
I understand leadshine does not manufacture am882 no more ? Where do those am882's come from then?
Good / bad clones?
Any reputable place to buy them ?

So... can one use the uc300 eth with gcode to control spindle speed over 0-10v from the ub1 ?

Is uc software licence bound to the motioncontroller or to the pc hardware?


Grtz Bert.



Verstuurd vanaf mijn SM-A320FL met Tapatalk