MK1 Steel router build log 1500x800x200

[driftspin]

Won't get that lot inside 18 x 50.!!
Doesn't work like your nice neat drawing and you'll never get them to lay like that in reality. You'll need at least 25 x 56 and even then I'm not sure it will all fit easily.

Hi Jazz,

I did this drawing to hear from people here who have actually done a drag chain since i have not.

So thank you all for getting involved again and saving beginners like me from obvious mistakes.

So.
The drawing is worst case and 2 spare cables. 4mm2 wasnt drawn.

Ok recap.

I hope i can drop 2 coolant 8mm lines and replace it with 12volt line.

Q1
I would like to know about pc pump radiator setup on z assembly for spindle cooling, is it an ok option?

i can drop from 1.5 to 1.0 mm2 for spindle.
i can drop from 6mm air to 4mm

I have 2 cy 4x0.75 spares drawn.


Q2
Does one stack cables in a dragchain or should it be avoided?

Grtz Bert

Verstuurd vanaf mijn SM-A320FL met Tapatalk