Hi JAZZCNC,

Peak it is... so... i can save a few bucks.

Thanks Bert.

Quote Originally Posted by JAZZCNC View Post
They are Peak ratings, most motor ratings if data sheet doesn't show both will be the peak rating.

Also, I have some of the 2DM860H but only tested on the bench at the minute. however, they seem nice smooth with low motor heating even after being stood for hours. This is always a good sign because lose motor sat on bench is open to resonance and the drive is obviously handling any resonance because nice smooth operation.
Will tell better when put on a machine but so far I wouldn't tell the difference between these and AM882.
Verstuurd vanaf mijn SM-A320FL met Tapatalk