MK1 Steel router build log 1500x800x200

[driftspin]

Happy day today.

I recieved a few items today.

VFD
Spindle
80mm bracket
Drives.

So.

Wiring can now start.

I need oppinions.

Will this layout work.





So basically the idea is to keep the vfd down right and keep wiring short and straight out the box not interfering with other wiring.

Have the 70v dc close to the drives.


And the 5 v and 24v dc top left near the uc and 5 axis bob stuff.
Still need to source 5vdc psu.
Did any of you use usb type a smartphone charger for a psu on UC ?


Anyway
High power wiring lower section

Low power upper section.


Tried to do something smart with a channel for hot air straight outside somewhere in the middle on the right but ran in to other problems when doing that.

I want to create airflow from left to right.
Need to figure that out.

12vdc adapter is for spindle and cabinet cooling.




Only low power thing together in cable tray with shielded stepper cables is homing and safety and probe.

I think the on/of pump relais will for now turn on a relay.. to switch the 12v dc spindle cooling. and maybe the vfd for now.



I plan to hook up the stepper cables directly on to the drives.


Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk