MK1 Steel router build log 1500x800x200

[driftspin]

Ok so i figured some stuff out.

Made some (very slow) progress and produced the first parts for my diy dust shoe.


I need to get familliar with F360 modelling and manufacture options contour pocket 2d 3d
Was struggling with some differences between solid works and F360.. Youtube was a great resource.

I am really impressed on accuracy of the machine.
A 120mm circle was off by only -0.02 mm in both directions i actually suspect my cutter dimensions being not accurate.. Not important for now.

For now it is far better then my current operating skills.

I bought an acculock ( kurt style ) vise 140 mm and put grid of m6 nuts in a multiplex spoilboard.


The vise needs a solid support structure i still need to fabricate.


Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk