Hi guys,


I am about ready for the big pour.
Planning to do it this week or next.

I plan to put the frame under a tarp with a thermostat controlled heater during curing.
And set it to 25 C.



Now i need some looking over my shoulder before ordering linearcomponents.

I have a quote from Fred.

The shopping list:

Rail.
2pcs HIWIN HGR20-L1830mm Linear rail

2pcs HIWIN HGR20-L1000mm Linear rail

2pcs HIWIN HGR20-L500mm Linear rail

12pcs HIWIN HGH20CA Linear carriage



Ballscrews rolled C7.

End machining fixed float for a pulley

Z-axis
1set C7 RM1610-L350mm Ball screw with ballnut

Change Length F to 30mm*

Y-axis
1set C7 RM1610-L1150mm Ball screw with ballnut

Change Length F to 30mm*


X-axis
2 sets C7 RM2010-L1700mm Ball screw with ballnut

Change Length F to 30mm*

2pcs 1610 Ballnut Housing

2pcs 2010 Ballnut Housing


2 sets bk bf12 1610

2sets bk bf15 2010

Upgrade all of the 4set BK/BF* to Superior bearing type.


Any thoughts?


Grtz Bert




Verstuurd vanaf mijn SM-A320FL met Tapatalk