Dead 6040 controller box

[Zeeflyboy]

photos would certainly be helpful.

I assume you've done the obvious like check the fuse in the main plug? Since you hit the physical emergency stop button I assume you've made sure you twisted it and it popped back out fully?

A multimeter is really required for any trouble shooting, I assume you have one?

[Splinter]

Yep Zeef i've tried the obvious first, i would have been chuffed if it was the fuse but it's never that simple is it and yes i popped the e-stop back out again, i do have a really basic multi-meter but my sum experience with it is checking the voltage of a battery.

Excuse the delay in replies fellas, i did reply to you both fairly quickly but it seems they have to be cleared by a moderator first.

Anyway here's the pics



and the spindle, it's 2.2kw water cooled




hope the image quality is good enough.

Cheers