Huanyang VFD current draw measurements.

[Edward]

With the KFlop, you could pull that data from the VFD using Modbus, then show it in KMotionCNC.

Thanks m_c. That would be quite handy, as the VFD will be some distance from the computer. However, learning all about Modbus is a little beyond me at this stage;)

I have my second Kflop now for the router I'm building, it took a little while to be familiarised with it sufficiently to get it fully going, with some simple C code for the probe and so on, but it's been very reliable.

Edward