Thread: Best anodizing guide?
-
07-04-2018 #61
-
13-04-2018 #62
Not sure why but set the power supply to CC instead of CC/CV and now getting this...
-
13-04-2018 #63
-
13-04-2018 #64
-
23-04-2018 #65
Still no idea what I am doing wrong here..
Yesterday I threw in a bit of scrap and it came out looking alright.
This problem is only happening with my tumbled parts...
Just found someone on eBay UK selling the Craftsman Electric Powder Coat Spray Gun that is quite popular over in the US for its low price.
So for £40 with powder I thought I might give it a go.
https://www.ebay.co.uk/itm/NEW-Craft...72.m2749.l2649
-
23-04-2018 #66
Be interested in how you get on with powder coating.
The PSU is 110VAC and 60Hz, but should work okay on a step-down at 50Hz (will wait until you give a review before buy
-
23-04-2018 #67
I am hoping they ship 240v but picture does show 120v brick :/
I sent them a message about it on Friday but have not heard back.
Looking online, the gun wants 24v DC and the ground cable is to ground. Should be able to feed it the 24v off my desktop psu and hock the parts to any of my ground points.Last edited by JOGARA; 23-04-2018 at 04:29 PM.
-
23-04-2018 #68
That's the wacky bit - the powder, as you know, needs to be electrostaticaly charged - I guess there's a HT generator in the gun. I'm sure it'll be fine and 24VDC isn't hard to find.
-
27-04-2018 #69
ill be honest ive not read all 7 pages of posts.
when it comes to sourcing the required products where and what do people buy?
I know dies are easy enough to get off ebay, but acids etc...?
-
28-04-2018 #70
eBay - I bought my hydrochloric and sulfuric off eBay at 5l quantities - never been a problem.Similarly a degreaser (who's name I can't remember and it's too early to pop to the shed)
EDIT:
Things are getting more difficult...
Here the legislation and licensing requirements of Sulfuric acid, amongst others.
Looks like I need to go to the shed, after all, and dilute the little acid that I have left
Time to stock up on battery acid from your local corner car parts shop.Last edited by Doddy; 28-04-2018 at 07:08 AM.
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Yet Another Noob. Looking for Kit or Guide
By RatherBeMaking in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 09-04-2015, 09:52 AM -
Idiot's guide to Dolphin?
By m_c in forum DolphinReplies: 7Last Post: 18-12-2013, 02:42 PM -
DIY CNC Safety Guide
By tati in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 12-08-2013, 12:02 PM -
First Experiments Anodizing Aluminium at Home
By h4ppy-chris in forum Metal Finishing TechniquesReplies: 11Last Post: 13-02-2011, 01:10 PM -
SMD-How to guide?
By Ross77 in forum General ElectronicsReplies: 12Last Post: 17-08-2009, 06:43 PM
Bookmarks