Thread: carving issues-UNSOLVED
-
14-10-2017 #51
yes I fitted a laser pointer so I could trace the movements let it run on a couple of cycles it still stalled so sadly no noise issues as far as I know. sorry if I havent explained myself so well Ive been running backwards and forwards to the workshop all day trying various different things and I am a complete noob.
-
it still stalled so sadly no noise issues as far as I know
Have you tried just using the x axis with a cut and then the Y axis with a cut to see if any one of those stallsLast edited by Clive S; 14-10-2017 at 10:51 PM.
..Clive
The more you know, The better you know, How little you know
-
14-10-2017 #53
I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.
-
Google EMI https://en.wikipedia.org/wiki/Electr...c_interference It is very common if the wires are not screened.
..Clive
The more you know, The better you know, How little you know
-
17-10-2017 #55
Its working after a complete computer rebuild new graphics card I have ran it for 2 days with not once did it make that awful sound in fact it ran for 3 hours constant today it didnt put a foot wrong so thank you everyone for the information and help, now how do I make money with it :).
-
17-10-2017 #56
-
19-10-2017 #57
Its working after a complete computer rebuild new graphics card I have ran it for 2 days without it making that awful sound in fact it ran for 3 hours constant today it didnt put a foot wrong so thank you everyone for the information and help, now how do I make money with it
Last edited by woodworker; 19-10-2017 at 09:35 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
3d carving oak
By Mikeb in forum Woodwork DiscussionReplies: 11Last Post: 24-03-2014, 10:22 AM -
V bit carving
By Mikeb in forum Tool & Tooling TechnologyReplies: 4Last Post: 20-02-2014, 04:52 PM -
tools for 3d wood carving
By chris in forum Marketplace DiscussionReplies: 5Last Post: 18-01-2014, 04:23 AM -
3d carving bits
By drut in forum Tool & Tooling TechnologyReplies: 9Last Post: 04-07-2013, 01:03 AM -
Microcarve picture carving software
By cnctoybox in forum CAD & CAM SoftwareReplies: 0Last Post: 26-03-2012, 07:00 PM
Bookmarks