carving issues-UNSOLVED

[Clive S]

it still stalled so sadly no noise issues as far as I know

What make you think there is no noise issues?

Have you tried just using the x axis with a cut and then the Y axis with a cut to see if any one of those stalls

[woodworker]

I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.

[Clive S]

I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.

Google EMI https://en.wikipedia.org/wiki/Electr...c_interference It is very common if the wires are not screened.