looking for a pendant to work with Cslabs ip-m mach 3

[Chaz]

im looking of some sort of pendant/hand wheel to work with my ip-m and mach3 that im running, the cs labs one is crazy expensive! can I just plug one of the £60 ebay jobs in with a usb to my pc and it work or is it more complicated than that?

Yes, you can. Ive got one that I am doing and have done one before.

As long as it has the correct A and B pulses it will work, refer to the CS Labs MPG module (you need the module) manual.

Otherwise you can use one of the Mach 3 PC ones that dont work directly into the controller however they are not as good (but might suffice for what you need).