Please help me build a power supply safely

[Toolman321]

Hello
I would like to build a power supply for 3 x dm542t stepper drives they require 50v max and I've learned that I will need to set the current for each drive at 2 amps.
I have this transformer left over from my last build, I replaced this with a regulated power supply because I didn't know how to wire it up.
However somebody recently told me that with some simple electronics i.e. A bridge rectifier/capacitor/fuses, i would be able to re-use it.


I'm unable to find any information about this transformer on the internet and so I'd like to ask for your help please!

If anyone could explain to me the taps and which ones to connect to, and what size capacitor I will need that would be great
Many thanks
Lee