Thread: Upgrading a Denford Triac Mill
Threaded View
-
08-10-2017 #1
Hi Folks,
I was going to ask the same queries on the Denford site but thought I would put them here as well, as there is a wealth of knowledge on this forum!
Basically I have no idea what I'm doing lol.
I have acquired a mid 80's green Triac, R8 spindle, no ATC. I'll be primarily using this for prototype development making parts out of steel, and will need to do some 3D machining. I'd like to be able to run Mach 3 on the mill as this software is well supported from a community point of view.
As for parts, I was thinking to use steppers from CNC4You...Nema 23 3.1Nm for the X and Y, and a Nema 23 4Nm for the Z. Are these going to have enough grunt for this mill and application?
Can anyone comment on the CNC4You reccomended drivers, namely the CW5045 (https://www.cnc4you.co.uk/Microstepp...tepping-CW5045) ? Any good? The price at £39 each seems good.
An area that is confusing to me is the application of a motion controller. I have heard favourable reviews of the CSMIO IP-M...but frankly have no idea why you would need to add this bit of kit. Could someone explain its function to me please? I have seen simple conversions which use stepper drivers linked up to a BoB and all seems well, so why the need for a motion controller? And how would the CSMIO IP-M compare to a UCS100?
Another thing I was wondering is what controls the spindle speed on a Triac? Is there a board or card that could be salvaged from the electronics and still be compatible with Mach3?
Any help would be greatly appreciated, as would any suggestions for alternative components and suppliers. I am needing to do this on a tight budget.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford triac vmc mill 2000 -2001
By Ade taplin in forum Denford MillsReplies: 2Last Post: 03-08-2017, 03:01 PM -
Denford Triac VMC Mill with ATC, SERVO drives
By Ade taplin in forum Denford MillsReplies: 0Last Post: 01-08-2017, 01:00 PM -
Denford Triac Mill
By DaveMann in forum Denford MillsReplies: 7Last Post: 12-01-2017, 10:43 AM -
FOR SALE: Emco mill 50 cnc mill like Denford Triac
By gavztheouch in forum Items For SaleReplies: 0Last Post: 18-05-2014, 10:19 AM -
WANTED: Wanted Denford Triac CNC Mill
By angusnoble in forum Items WantedReplies: 1Last Post: 15-07-2012, 06:45 PM
Bookmarks