Thread: My Build log
Threaded View
-
26-03-2018 #1
Hello all,
So for the last 7 years, I have moved my way up from CNC operator to CNC program & setter and now moving into the realm of the designer.
I have always wanted to build my own personal CNC for home but never had space till now.
I am in the phase of gather knowledge and proceed from there.
what I wish to get out of my machine cut wood, carbon fibre aluminium and casting wax.
First question the shed in which my CNC will be built has a wooden now if I reinforce the area would this work or am I better off cutting out the section and backfilling with concrete?
Secondly, build are I have been given some components from a friend that I want to use, these are 2 x 650mm ball screws and a 1 x 350mm ballscrew what kind of build area would I achieve with these?
and what length linear rails would I need?
Thirdly I recently had a machine decommissioned at work sad part is I wasn't able to take parts for myself but was able to take the spares, the main part that I was able to source from this was.
Now does anyone know where I can get the rails to suit them and I have 6 is that enough to do the x and y-axis?
alternatively, I have designed my own.
I know people have made linear bearing like these but to what success.
The 4th question as I won't have enough linear rails for the z-axis I have been looking around and was wondering if they were any good or total waste of money.
https://www.banggood.com/Machifit-HG...r_warehouse=CN
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks