Threaded View
-
10-10-2017 #11
Given they are fairly small parts with tight nooks and crannies I'm not convinced you'll be happy with anything other than sand blasting.
You could try tumbling in a finer abrasive material like aluminium oxide grit (Like often used for blasting), that's more likely to get into the internal corners etc than the large tumbling media. You might need to experiment a bit.Last edited by Zeeflyboy; 10-10-2017 at 07:32 PM.
-
The Following User Says Thank You to Zeeflyboy For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Polishing/Finishing Media
By matt-b2 in forum General DiscussionReplies: 6Last Post: 19-10-2016, 10:42 PM -
photvcarve finishing techniques
By universally in forum Wood Finishing Tips & TricksReplies: 3Last Post: 12-10-2016, 07:24 AM -
Belt Grinder 2x72" and 50x2000 mm
By Boyan Silyavski in forum Metalwork Project ShowcaseReplies: 23Last Post: 08-03-2016, 07:17 AM -
Need some help and advice, ideas for finishing a detail
By Boyan Silyavski in forum Metalwork DiscussionReplies: 5Last Post: 09-12-2014, 04:05 PM -
Roundover finishing - what's causing this..?
By Wal in forum Woodwork DiscussionReplies: 4Last Post: 18-03-2014, 03:37 PM
Bookmarks