-
11-10-2017 #1
Hello guys,
My story:
I'm an enthusiastic of homemade builds since I crashed my first battery car to remove the motor to create a fan propeler to my lego construction @6year old.
I had spend lots of time racing Motocross in Portugal, and I always made my bike maintenance, during my racing time I also studied Material engineering, that I finished the master degree in 2013.
I enjoy to do some CAD modeling, Aluminium casting, 3D printing, and now I'm starting on the CNC world.
The last project that I made was a CNC router, you can see the video here:
I was using CNCzone, but it was very confusing...
I want to continue the building and using of this CNC, do you have any suggestion in which forum should I start the thread?
Thak you.
My youtube channel: www.youtube.com/laranjas3
My website(under construction): http://www.tailortech.pt
-
11-10-2017 #2
Welcome to the forum
Sounds like you have similar interests to the guys here. You can start a build thread in the Machines> DIY router builds. See the tabs at the top of the main page
-
12-10-2017 #3
Thank you,
Will post in the recommended forum.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Surface Grinder - Elliott 618 - Any Good?
By Chaz in forum Metalwork DiscussionReplies: 2Last Post: 30-08-2018, 01:51 PM -
Belt Grinder 2x72" and 50x2000 mm
By Boyan Silyavski in forum Metalwork Project ShowcaseReplies: 23Last Post: 08-03-2016, 07:17 AM -
Centerless grinder LOESER RPS 374 - in Europe
By Grinder in forum Opportunities Available & SoughtReplies: 1Last Post: 24-11-2014, 04:53 PM -
NEW MEMBER: 3d printing to CNC
By AVRnj in forum New Member IntroductionsReplies: 27Last Post: 04-04-2013, 11:09 PM
Bookmarks