Training wanted - CAD and ~G-code

[magicniner]

I'm gradually learning G-Code, meanwhile I'm making anything from simple cutouts from sheet to some quite complex 3D parts, all with CAM.
Contrary to popular belief it's very quick to CAM simple stuff and it makes things like engraving text, ramped profiles and roughing with finishing passes very simple.

- Nick

[EddyCurrent]

In the short term you don't need to learn g-code to use the machine because the CAM software will generate it for you. In the long term however it would be useful to know some g-code and you will learn it as you progress. Take a look at CamBam for the CAM software, http://www.cambam.info/shop/ there is also a Linux version if that's the platform you intend to use.

If the CAM software you use does not have an integrated simulation, this will be useful (and it's free) http://www.camotics.org/