. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 27-10-2017 #12
    Ger21's Avatar
    Lives in Detroit, United States.
    Ger21
    Last Activity: 24-07-2022 Has been a member for 9-10 years. Has a total post count of 651. Received thanks 90 times, giving thanks to others 0 times. Referred 1 members to the community.
    Quote Originally Posted by Jeff View Post
    I've watched some pretty impressive videos of the UC300ETH in action and it was definately on my radar, but that BOB you listed is seriously expensive. Would the UC300ETH run with an MB-2 which I know was designed for the ESS but appears to have all the functionality of the UB-1 for half the price?
    $320 includes the UC300ETH. The UB1 itself is $180. Yes, you can use an MB2, but it would require a 5LPT motherboard for the UC300ETH, which adds $40, and makes it the same price.

    The UB1 + UC300ETH + UCCNC license = $380.
    An ESS + MB2 + Mach3 License = $565

    Also, the MB2 has less functionality then the UB1. The UB1 adds analog inputs, an extra analog output, and an extra relay.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Ger21 For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice on a charge controller please :)
    By blackburn mark in forum General Electronics
    Replies: 23
    Last Post: 04-05-2020, 07:28 PM
  2. Advice needed for controller box layout
    By Bustercnc in forum General Electronics
    Replies: 23
    Last Post: 18-01-2016, 01:16 PM
  3. USB/Ethernet controller for Mach3/4 advice
    By paulus.v in forum Control Hardware & Systems
    Replies: 17
    Last Post: 17-02-2015, 09:37 PM
  4. Advice please! JAF Motion Controller issues!
    By Mark Chard in forum Machine Control Software
    Replies: 0
    Last Post: 31-01-2014, 05:03 PM
  5. Which controller and motors? Newbie advice please
    By Nealieboyee in forum Motor Drivers & Controllers
    Replies: 14
    Last Post: 16-10-2012, 02:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules