. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #5
    Went for this system, Finerfilters 4 Stage Compact Reverse Osmosis Filter With DI Resin (100 GPH)

    It is only £57 and should last a decent amount of time.


    Don't have water into the workshop yet so just shoved it on a stick by the outside tap..



    Within a few hours (4-5) I had 20L made.



    Using this TDS meters, Yakamoz LCD Digital TDS-3 Meter Temp PPM Tester Pen
    Found that our tap water is between 120-160 (taken at multiple times of the day, is that a thing?)
    The filtered water, 000 :)





    With the 20L I have made, waste water is nearly 200L.
    This will be used elsewhere but is a lot more than what others are saying being 1:3-1:5 ratios.
    Apparently you can/should clamp the waste to get better ratio?

    Either way. Cheaper per liter still.
    SevenTrent are charging us "£2.41" per 1000L of water. I was paying £2.29 at ECP so even with the 20-30L I had to flush through the system to prep it I am less than a quarter the price already (excluding the system setup and running costs).

    10/10 Would recommend.
    Last edited by JOGARA; 06-04-2018 at 07:56 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. A build log of my place, a 6.5 x 5.5 x 2.5m diy home workshop!
    By kingcreaky in forum Workshop & Equipment
    Replies: 21
    Last Post: 26-11-2014, 08:27 PM
  2. Do you need to water cool erhm a water cooled spindle?!!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 18
    Last Post: 02-10-2013, 09:59 PM
  3. Replies: 17
    Last Post: 18-09-2013, 06:32 AM
  4. New Workshop
    By Washout in forum Workshop & Equipment
    Replies: 13
    Last Post: 26-12-2012, 10:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •