Threaded View
-
27-10-2017 #1
Hi all!
I have been using quite a bit of de-ionized water lately and looking to reduce my costs.
Currently I am getting 5L for £2.29 at my EuroCarParts.
That is around 46p per liter.
With the anodizing setup in my workshop now I am using a lot more than normal. I keep clearing out my local branch too so looking to buy a de-ionizing kit to reduce cost, time spent getting the stuff and ease of having it on tap..
From my research, to de-ionize all you really need is a resin filter.
There are full reverse osmosis systems out there but is that all really needed if you just want de-ionized?
I have been looking around and have found a filter that is pretty much self contained. It is £30 and does around 2000L. So works out to around 1.5p per liter excluding metered water. https://www.eastmidlandswater.com/De...?ProductID=758
Which is around £1 per 1000L so add .1p to that.
1.6p per liter is a lot better than 46p plus the fuel driving back and forth.
Am I on the right track here?
Thanks
Jack,
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A build log of my place, a 6.5 x 5.5 x 2.5m diy home workshop!
By kingcreaky in forum Workshop & EquipmentReplies: 21Last Post: 26-11-2014, 08:27 PM -
Do you need to water cool erhm a water cooled spindle?!!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 18Last Post: 02-10-2013, 09:59 PM -
Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 17Last Post: 18-09-2013, 06:32 AM -
New Workshop
By Washout in forum Workshop & EquipmentReplies: 13Last Post: 26-12-2012, 10:22 PM
Bookmarks