Thread: New member
-
18-08-2009 #1
I work for a few years as a programmer in motion control.
Here is some freeware I made:
http://www.plasma777.com
One is BMP to DXF (or GCODE) -> tracing softwer god for plasma or lasr
Second is CAM (part maker) good for plasma laser and maybe for router
Export to GCODE is finished but i still work on it
I have plan to build nesting program with export to GCODE, so almost
complete system for plasma cutting
-
19-08-2009 #2
Plasma
Welcome to the forum, I'm sure there will be members on here interested your software, thanks for sharing
Andy
-
26-08-2009 #3
Hi Plasma777
I have been messing around writing nesting software, I have the dxf to gcode sorted and have a simple bump nesting routine running, gets a bit too slow when I have more than 10 shapes on the go, but early days yet. Dumped a screenshot in the gallery. It is used with a touch screen so has big buttons.
Mike
-
26-08-2009 #4
Mike,
Did you know that Vectric now has nesting in VCarve V5.0 and Aspire ?
there are some video's on the Vectric home page.John S -
-
26-08-2009 #5
looks to be clever stuff, I'm glad I only have to worry about 2D . I thought about using other peoples routines under license but it gets costly rewriting the interface so we can bung it on a machine controller. Generally we flog MAP software with a machine, but its good to have a simple system the operator can use out on the machine.
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks