Threaded View
-
02-11-2017 #1
I've been spending many hours reading build logs and getting a few insights into designs for moving gantry routers.
Couple of questions for the DIY CNC Hive Mind:
I have seen that people arrange the x axis carriages such that the point of the tool will be between them. Z axis depth means that the y axis beam ends up set back towards the rear x carriages. (One or two designs I've seen don't bother with this, they just have a more massive gantry with more depth...)
Is there an optimal spacing for the x axis carriages - assuming that loss of x travel is acceptable to get a more rigid gantry?
Does having the carriages further apart add much benefit?
I guess this apples to all axis?
So for hiwin 20mm carriages, set with a gap between the seals of say 40mm, the total width of both carriages comes out at something like 200mm, so to have a working x of 1500mm, you need another 200mm of rail and bed.
This dimension really sets a lot of the overall dimensions of the machine...
When sketching up a layout, I found that starting with the carriages and rails makes getting the overall dimensions easier, so I want to be sure I get the carriage spacing in the right ballpark first!
Assuming the machine is for milling aluminium and wants to have a working area of around 1500,750,250 ish!
Second question is about the z axis. I read that rails on the spindle plate is better, but many don't build like this. I assuming that by mounting the rails on the spindle plate, you get a lot more z travel, but the spindle can overhang (or rather over drop?) the carriages. doesn't that lead to possible vibration and flex in the z axis?
I suppose large z axis travel means that a vertical mill configuration is the best approach, seeing as gantry designs are more about 2d cutting...
So is there a rule of thumb for z travel given a pair of 20mm rails with a 2.2kw spindle?
Cheers!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hi and a couple of questions.
By TheBoltonian in forum New Member IntroductionsReplies: 4Last Post: 08-01-2017, 05:58 PM -
hi all, new to cnc building,couple of questions if anyone can help. TIA
By universally in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 18-01-2015, 04:12 PM -
RFQ: Z axis and y axis carriage
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 08-04-2013, 10:06 AM -
Reinforced plastic beams for x-axis rails ?
By flanagaj in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 19-10-2011, 05:28 PM -
x-axis rails and lead screw
By adambrum in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 13-08-2011, 01:56 PM
Bookmarks