Control Panel nearly done!

[m_c]

What do you think?
Just a bit wiring needed, then some gaffer tape onto the side of the machine, and I'll be good to go

[cropwell]

Shouldn't that big red knob be labeled 'Oh F**k', but I do think you have overcomplicated things,

[m_c]

I'll get a fresh Sharpie out once it's all fitted for the labelling.

From top left to right, I think it's these labels-
Big dial - Move.
Little knob one - Lefty/Righty, Inny/Outty, Uppy Downy (plus spinny aroundy for the 4th axis option)
Little knob two - Wee nudge, Wee Baw Hair, Big Baw Hair, Big Nudge
Big knob one - No as fast, Faster
Big know two - Quiet, Loud
Red Button - Whoa!
Green Button - Go!
Big Red Button - S***e!

[routercnc]

Like it ! Puts mine to shame and makes it look over-considered.
Can't wait for you to hit that estop and punch it through the panel whilst your machine carries on !

[magicniner]

That's a posh box, I think you may have over-engineered it! :D

[Clive S]

This is my Oh s###e button,

And it bean tested many times

[m_c]

I've been umming and arring over the control panel for a while, and having finally finished all the major cabinet wiring and programming last week, it has reached the top of my roundtuit list.

While contemplating button/dial placement, I happened to notice the box which was about the size I had in my head. So after rounding up all the bits, I got the scissors out tonight. I was going to put the axis/step size select switches above the MPG, but having tested the layout, I felt the MPG would be too easy to knock while working the switches, which is why all that seems a bit bunched up.
I'm going to put a handle along below the buttons, so I can rest my hand on it while working the MPG.

Next step is modelling it in Fusion.

[cropwell]

You'll be needing the Mach Tavish plug-in Dr Finlay !

[Doddy]

I'm actually surprised to read this thread here and now - I'm in the process of replacing a panel on the starmill that had a single E-Stop button with one with a full axis/mpg and DRO indicators, and just last night started learning F360 and mocking up the panel.

I might nick the alternative E-Stop label, though