Mach3 Screensets

[kirby43a]

Hi Gerry,
thanks for your help, I guess I bought the wrong retrofit kit and now I am going to have to live with it's shortcomings or dig into my pension and start allover.

An interesting recent observation of my CS Labs CSMIO/Mach3/Big Tex Bluescreen configuration: Regarding the tool measurement utility; Both the "initial Setup" and the "Zero Tool Setup" consistently function correctly however when a tool change is either embedded in a "G" code or is triggered manually in the middle of a toolpath the tool will move to the correct location to change the tool and proceed to the touch plate, when the tool touches the touch plate the first time it trips-out and a ePID error box comes up; with the system "RESET" and the tool is jogged up and the "Zero Tool Setup" is hit the operation functions correctly and proceeds to the next line of code. If an embedded tool change is initiated and the "STOP" button is used and then the "Zero Tool Setup" is hit the tool is measured correctly and it proceeds to the next line.

I had wondered whether my observation resonated with anyone else.

Harry