Hybrid View
-
25-11-2017 #1
I saw this one, single phase, but it's still expensive, I'm sure you have seen it too. At 2.2kw maybe still feasible for home use, if you have the dough.
https://www.air-compressorsdirect.co...ompressor.html
I am looking for something quiet and affordable just for the mist system, something like the first OP link.
-
26-11-2017 #2
I never noticed that screw compressor, but it was the ABAC floor one I was looking at from that same website, as I've at least heard of ABAC, so hopefully spares will be available should they be needed.
I ideally need a vertical tank, unless I build a lean to outside, or stick it up in the rafters. The main reason I was considering a screw, was for the better efficiency and far quieter running, but I'm going to see how I get on with the hydrovane first. Going by the figures (4.3CFM at 10bar), it should provide more than enough air for the vacuum table.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
26-11-2017 #3
I got the largest Hydrovane that would run on 240 supply(15PUTS)
Free Air Delivery @ 7Bar - l/sec (ft3/min) 4.5 (9.5)
Free Air Delivery @ 10Bar - l/sec (ft3/min) 3.53(7.5)
Literature says quietest air compressors on the market (have had mine since 1986) so might not be the case now.
Don't know where you are locating it but mine is in my shed, too much load to start in really cold weather, if i am desperate to use it i preheat with hot air gun.piston compressor might not have this limitation?
Regards
Mike
-
26-11-2017 #4
Scroll compressors are quiet. Less than 60dB.
Just an idea.
regardsLast edited by fifa; 26-11-2017 at 11:53 AM.
-
26-11-2017 #5
Seem to be very similar noise wise to screw and vane compressors.
This screw in 2.2kw flavour is listed as 60dB - http://www.fps-compressors.co.uk/fle...mpressors.html
That 2.2KW ABAC screw I mentioned above is listed as 61dB
Although having checked, the hydrovane is the noisiest at 69dB, which is the same as the compressor in the first post.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
26-11-2017 #6
From the looks of it, the one I linked is the best bet at the price point one is looking at.
I put a RFQ on Alibaba to see if I could pick a couple of the higher powered motors off there but its the weekend...
Going to order the one linked in the OP I think.
Thanks for all the comments and suggestions.Last edited by JOGARA; 26-11-2017 at 08:10 PM.
-
26-11-2017 #7
Yes, I think it's a nice little one for the price.
I was looking at the Bambi with similar specs, although the claimed decibels are only 54db. That's just normal conversation volume, but it's double the price.
https://www.airsupplies.co.uk/bambi-...air-compressor
Let us know how you find it once you buy it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Compressor advice
By Neale in forum Workshop & EquipmentReplies: 37Last Post: 16-05-2017, 03:27 PM -
Air compressor / VFD
By dudz in forum Workshop & EquipmentReplies: 3Last Post: 24-12-2015, 08:41 PM -
What to look for in an air compressor.
By Philly in forum Tool & Tooling TechnologyReplies: 28Last Post: 27-04-2013, 11:02 PM -
Which air compressor?
By newtoid1986 in forum General DiscussionReplies: 7Last Post: 12-12-2011, 04:07 PM -
Silent compressors, get me every time
By Robin Hewitt in forum General DiscussionReplies: 2Last Post: 30-03-2010, 02:31 PM
Bookmarks