welding steel base or just getting aluminium extrusion

**Nr1madman** · 02-01-2018

Also think about if you are gonna use drills as they can be longer than routerbits.
I got the tip to calculate z travel/clearance based on thickest material and longest drill I plan on using :)

Skickat från min SM-G955F via Tapatalk

**reefy86** · 02-01-2018

most of the 3d work will be on mdf

**Neale** · 03-01-2018

Any chance you can use layering in your CAM setup to cut the piece in layers with registration pins for cutting and reassembly? I know it depends on what you are making, but just in case this is for something like MDF moulds, it might do the job.