welding steel base or just getting aluminium extrusion

**Nr1madman** · 11-01-2018

Hmm how about jonathans build with the red frame? Didnt that one have similar solutions?

:D

Skickat från min SM-G955F via Tapatalk

**Boyan Silyavski** · 14-01-2018

I think this could be a very serious challenge to put all together with the needed precision. This designs is not stronger than my design. Which is simpler. More rails and more head scratching.

**reefy86** · 14-01-2018

Originally Posted by Boyan Silyavski

I think this could be a very serious challenge to put all together with the needed precision. This designs is not stronger than my design. Which is simpler. More rails and more head scratching.

Hi Boyan, I was trying to keep the z axis very strong using the box design so would you say a single beam is more then capable? or is there something else that you think is over complicated.

cheers

**Boyan Silyavski** · 15-01-2018

Originally Posted by reefy86

Hi Boyan, I was trying to keep the z axis very strong using the box design so would you say a single beam is more then capable? or is there something else that you think is over complicated.

cheers

I think you are from those type of people that will not listen to reason as you all ready have decided your way and you like challenges. This impression i have from the thread and our PM. So i don't want to discourage you, as if i say what i think and you listen to me, will have to start from scratch

Whatever way to do it will be possible if you are persistent and have enough time. So no worries, if this is what you feel is the way. For me this is a design for an experienced machinist who has a mill at home. What more to say.

**reefy86** · 15-01-2018

Know worries Boyan mate i don't not listen otherwise i would of started this by now :) I have all the steel/welding equipment ect just waiting on getting some decent engineer squares and edges but i won't be starting the frame until i am happy hence why i keep playing around with the design. Not in a bad way but i was kind of trying to do some manual labour in cad software myself rather then just using someone else's and that is why i keep coming up with these designs not that i am saying its good and i am going to build it its more of a trial and error and if i get told its bang on then it makes me feel good because i made the cad drawing if you know what i mean.

Also not sure if you seen it in my post but when you say for experienced machinist with a mill well all my pieces that need milling will be done by someone who has the equipment this is why i need to make sure my drawing is spot on and not too complicated to put together.

Please don't think i am on here rushing because i give you my word i am not

Cheers