Thread: wanted few bits - long list
Threaded View
-
06-12-2017 #1
65mm 1.5kw water cooled 4 bearing spindle with 4 connection pins , or with earth
one vfd
one 3foot or 900 ish mm wide bosch Rexroth 20-145mm linear gantry
one 20 145 Rexroth linear doofer that gives me 50mm
one plate to bolt the z to the y
one pair of Rexroth rails and 4 bearings about 1200 - wide ones
one 16 or 20 - 5mm pitched screw nut and bearings
motor mounts Rexroth 145 to Panasonic minas / Rexroth ' yaskawa motors
65mm spindle mount to mount to the z
90 by 90 legged bosch Rexroth 45/90 table about 900mm high
will buy back all that I had and sold a few years ago if you havn't used it........
thanks
oh and someone to mill me some gantry ends to take a Rexroth 20-145, I want them to look realy cool though
i.e. they aren't going to be super tall - I want to build a sheet cutting cnc - or a plotter if you will, need not have to cut more than an inch - so want the ends milled from 40mm stock, and real pleasing to the eye - recessed, really workedLast edited by nobby; 06-12-2017 at 12:40 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
List of CAD/CAM Software
By Mad Professor in forum CAD & CAM SoftwareReplies: 72Last Post: 28-11-2018, 06:27 PM -
FOR SALE: SFU1605 Ballscrew & nut - 1150mm long & 750mm long - BK/BF12 end machined - £20 each
By Maccydu in forum Items For SaleReplies: 2Last Post: 21-09-2017, 06:12 PM -
Long bits/endmills
By dcrowder in forum Machine DiscussionReplies: 4Last Post: 24-03-2016, 10:18 AM -
WANTED: 2 nema 23's 76mm long dual shafts 6.35mm plus one 56mm long nema 23 dual shafgt 6.35
By nobby in forum Items WantedReplies: 0Last Post: 24-09-2014, 09:57 AM -
WANTED: wanted 250mm by ? 40mm thick isel t slot - 3 bits ? length and a 16 by 5 ballscerw
By nobby in forum Items WantedReplies: 0Last Post: 10-03-2014, 04:30 PM
Bookmarks