Aluminium Extrusion Router Build

[JAZZCNC]

Hi Jazz, that's the red loctite isn't it? Do you use the blue loctite on other bolts in the machine or is bolts loosening due to vibration not such a problem.

Yes Red on anything that don't want to slip or move. Blue on anything that just want to stop coming loose.

Going back to the ATC spindle have you used one of the Mechatron tool change adaptors for a normal spindle which I found on Sorotec's website https://www.sorotec.de/shop/Tool-cha...m-spindle.html. I think that to get started I would prefer a normal spindle to learn the basics of cnc machining and then to upgrade using this adaptor at a later date.

No I havent and not sure what to think about this design.? I'd be worried about runout and stress on the spindle. Think I'd be giving it a miss and going with real thing. Would get stronger spindle with more torque and less runout.

I was looking at the Lichuan drive and the Leadshine easy servo drive and both seem to accept 24V input with the use of current limiting resistors on the step and direction inputs for single ended. For the differential connection do you not need the resistors as in the data sheets, the differential connections are shown with a 5V connection. Can you not directly connect the drives to the CSMIO, or do you have to reduce the voltage for the differential connection.

No don't need resistors the CSMIO Step/dir Outputs are 5v not 24v.