Aluminium Extrusion Router Build

**wiremonkey** · 23-05-2018

Woohoo! That is one stout build and very clean work, particularly for not having a mill. Seriously, great stuff. I missed the type of linear rails you're using and do you like them? Also, do you have a supplier. I'm in the USA.
Thanks

**NFryer** · 24-05-2018

Originally Posted by wiremonkey

Woohoo! That is one stout build and very clean work, particularly for not having a mill. Seriously, great stuff. I missed the type of linear rails you're using and do you like them? Also, do you have a supplier. I'm in the USA.
Thanks

Thanks for the compliment about the work I've done and it maybe a bit of overkill but better stout than all flimsy. The rails I'm using are Hiwin 20mm ones together with narrow carriages on the Z axis and the wide ones on both the Y and X axes. I got them custom sized from a supplier here in the UK. If you want them you could try Fred at BST Automation on AliExpress. He sells Hiwin stuff and is a great supplier as I got a set of custom ballscrews from him and had no problems at all with them.

Sent from my iPhone using Tapatalk