Aluminium Extrusion Router Build

[NFryer]

Hi everyone, I've managed to get a bit more done on the router build, and have finished the 4 end plates which connect the 2 X axis aluminium extrusions, the corner legs and support the X axis ballscrews. I had to slightly alter the design as the ball screw on the fixed bearing end protruded through the end plate a bit more than anticipated. I had to make a simple rectangular cutout for the motor and a separate plate for the motor adjustment to tension the belt. To make the rectangular cutout I made a series of holes to get rid of most of the material and then used a end mill in the router and a template to neaten it up.

[Nickhofen]

Nice work!