Spindle motor

**Lodds** · 17-12-2017

Thanks Clive,

Did see those but the water-cooling turned me off. don't see how I could accommodate all the pipework water butt and pump within my limited space.

**phill05** · 17-12-2017

Originally Posted by Lodds

Thanks Clive,

Did see those but the water-cooling turned me off. don't see how I could accommodate all the pipework water butt and pump within my limited space.

You don't need much space, all you need is a small pond pump, a small computer radiator, and away you go, best thing is it's so quite you could take a phone call at the same time you are cutting.

Plus it don't wake the wife.

Phill

**Lodds** · 17-12-2017

Originally Posted by phill05

You don't need much space, all you need is a small pond pump, a small computer radiator, and away you go, best thing is it's so quite you could take a phone call at the same time you are cutting.

Plus it don't wake the wife.

Phill

Sounds so good Phill. As I said the Dewalt screams, even with ear protectors on it is unbearable. I have to do something about it.

If you are using a pond pump I assume you would have a bucket of water somewhere? I would be interested in know what PC Rad you are using with a pond pump. I'm having difficulty reconciling the size of the pond pump outlets to the inlets of a PC Rad.

**phill05** · 17-12-2017

No bucket you have a small tank on the pump and the rad it's a sealed system, my 3kw spindle never gets warm.
I'll have a look where I got mine and get back to you.
As regards the " inverters difficult to wire" the manuals take some understanding but you can always ask on here if your not sure.

Phill