Spindle motor

[Nr1madman]

I run mine with water from the dehumidifier and some antifreeze, I have not noticed any growth in it.

Cheers mate!
Standard clear tubing? Pp or pe maybe?

Skickat från min SM-G955F via Tapatalk

[Boyan Silyavski]

Cheers mate!
Standard clear tubing? Pp or pe maybe?

Skickat från min SM-G955F via Tapatalk

Standard clear tubing. The cheapest. No problem after a couple of years. And i really like using Pink liquid, so i see what happens. On my second machine i overdid it and ordered PU tubing from china. But there was no actual need in fact. The only difference was that the clear tubing around me is strange 5, 7mm and all connectors are 6, 8, 10mm. So as i wanted to do it more professionally looking with quick connectors, that was the only reason to use PU tubing. It cost very cheap from China.

By the way i use quick connectors on the spindle side too.

[Nr1madman]

Standard clear tubing. The cheapest. No problem after a couple of years. And i really like using Pink liquid, so i see what happens. On my second machine i overdid it and ordered PU tubing from china. But there was no actual need in fact. The only difference was that the clear tubing around me is strange 5, 7mm and all connectors are 6, 8, 10mm. So as i wanted to do it more professionally looking with quick connectors, that was the only reason to use PU tubing. It cost very cheap from China.

By the way i use quick connectors on the spindle side too.

Thank you!
Im looking for quick connectors aswell but there seems to be some special threading in the spindle. Maybe m8x1.. have to buy a bolt and test before I order anything :)
If going with pc cooling stuff there seems to be alot of parts using od/id 10/8 tubing.
If getting quick connectors with the same size I dont have to worry about reducers.. ;)

Skickat från min SM-G955F via Tapatalk