Thread: AndyUK's Build - 1.2x1.0m Gantry
Threaded View
-
23-12-2017 #4
Looks awesome!
I see a few improvements in your design that I will use if I start again with a new machine ;)
One thing I cant see clearly is the spacing of the bearings on the gantry sides compared to the spindle?
Its generally recommended to have the cutter inside of the bearings if you look from the side..
And it might be thats the case here.. but cant see clearly ;)
Skickat från min SM-G955F via Tapatalk
Thread Information
Users Browsing this Thread
There are currently 10 users browsing this thread. (0 members and 10 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
BUILD LOG: Build Log: 4'x4' Moving Gantry CNC Router
By GeorgeW21 in forum DIY Router Build LogsReplies: 14Last Post: 20-01-2019, 09:33 AM -
BUILD LOG: Ar last!!! Started my Gantry 3-Axis CNC Build
By MikeyC38 in forum DIY Router Build LogsReplies: 74Last Post: 16-06-2018, 11:29 PM -
Any sugestions how to build my gantry
By masinecc in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 20-09-2015, 05:17 PM -
BUILD LOG: Flying Gantry Build Diary
By geoff.sim in forum DIY Router Build LogsReplies: 8Last Post: 29-05-2008, 02:53 AM
Bookmarks