Thread: AndyUK's Build - 1.2x1.0m Gantry
Threaded View
-
25-12-2017 #6
The way to get ahead is to steal the best ideas and improve on them. So well done ;)
The way you have the bearings probably will work just fine because of the square rails you have chosen to work with. They should take the load.
Just so you know its unnecessary leverage and will intruduce forces that you could avoid.
If you were using other types of rails like unsupported rods it would be a much bigger issue :)
I know I spotted something else that I wanted to comment on but right now Im drawing a blank.. must be the snaps yesterday :D
Skickat från min SM-G955F via Tapatalk
Thread Information
Users Browsing this Thread
There are currently 8 users browsing this thread. (0 members and 8 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
BUILD LOG: Build Log: 4'x4' Moving Gantry CNC Router
By GeorgeW21 in forum DIY Router Build LogsReplies: 14Last Post: 20-01-2019, 09:33 AM -
BUILD LOG: Ar last!!! Started my Gantry 3-Axis CNC Build
By MikeyC38 in forum DIY Router Build LogsReplies: 74Last Post: 16-06-2018, 11:29 PM -
Any sugestions how to build my gantry
By masinecc in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 20-09-2015, 05:17 PM -
BUILD LOG: Flying Gantry Build Diary
By geoff.sim in forum DIY Router Build LogsReplies: 8Last Post: 29-05-2008, 02:53 AM
Bookmarks