Thread: Motion Controller
Hybrid View
-
29-12-2017 #1
Hi Chaps was wondering if anyone had a controller going spare?
I have committed to getting a couple of CNC jobs done over the next few days but my controller card has gone bad.
I need a 5 axis card that works with Mach 3 can be Ethernet/ USB / parallel makes no difference to me.
Im located near gatwick and happy to travel upto 60ish miles to get myself out of trouble.
Happy to pay what is needed to get a controller soon as.
Thanks
Peter
-
30-12-2017 #2
Hi Peter,
I don't know if this will help, but there is a home built CNC controller box being sold currently on this forum which includes a UC300-USB as well as stepper drives, PSUs and so on. Might be worth a look as an instant source? Have a look at http://www.mycncuk.com/threads/11465...8299#post98299.
Hope that helps!
Cheers
Graeme
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What is the advantage of using a motion controller rather than just a PC and BOB?
By Agathon in forum Control Hardware & SystemsReplies: 10Last Post: 11-08-2017, 04:34 PM -
Uc300 motion controller problems
By Hellfire in forum CNCdrive (UCCNC)Replies: 2Last Post: 07-11-2016, 07:21 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
eBay: Galil DMC-1580 Motion Controller 8-Axis
By Boyan Silyavski in forum Items On eBay UKReplies: 1Last Post: 25-12-2013, 10:30 AM -
USB and Ethernet Mach3 motion controller PLCM-E3
By Purelogic R&D in forum Manufacturer NewsReplies: 39Last Post: 29-12-2012, 09:38 AM
Bookmarks