What Neale has said.
Plus:-

You could go with supported rails but if you do you will wish you had gone of proper profile rails, although 15mm rails will do and are plenty strong enough the 20mm are much easier to mount and are not much different in price.

For a machine that size I would go with ally profile 90x45 The holes in the ends of them can be tapped M12 use two pieces for the gantry arranged in an L config and three for the main frame with ally end plates 20mm thick. Check out Joe Harris on here and see his vids all built with simple hand tools.

Start a build log to keep all the questions in one place