Thread: Selecting the right driver
Threaded View
-
06-09-2009 #17
Last Activity: 7 Hours Ago
Ahhh yes 2 windings ! Sorry !
Ok but if the cables connecting to the driver are carrying 4.2a, is that devided by 4 wires if the motor is in a bipolar parallel operation ?
Basicly Irving i just want to know what the correct rating of the wire should be that i use to connect the drivers to each motor/XLR. Can i not just use the same rated wire as whats on the motors or is it better to step down as you go?.Me
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
BOBCAD V24, Selecting issue on boundry & geomatry
By craigrobbo in forum BobCAD-CAMReplies: 1Last Post: 14-05-2012, 02:56 PM -
Which stepper driver
By Colin Barron in forum Motor Drivers & ControllersReplies: 0Last Post: 25-09-2010, 08:33 PM -
DIY Driver Cards
By malik sohail in forum Electronic Project BuildingReplies: 3Last Post: 27-12-2009, 10:41 PM -
Driver box
By John S in forum General ElectronicsReplies: 1Last Post: 21-06-2009, 12:46 PM
Bookmarks